JUUPINE new supertack Frostbite type plates (polyura) 257x257mm for Bambulab P1S/X1/X1C/P1P/P1/A1, special process polyurea coating, low temperature cold printing Cool plate, ultra-high viscosity

Produktbeschreibung

Polyurea texture printing: The printing bed [swamp] 3D printing platform hot bed adopts polyurea oxidation coating technology, with spring steel plate as the base material, and multi-layer polyurea technology superposition optimization composition. The printing plate is corrosion-resistant, high-temperature resistant, durable, and will not cause the risk of coating shedding due to repeated bending. The surface texture is delicate, smooth and soft, making the printing bottom smoother. The viscosity is like a swamp, full of adsorption and flexible. Unparalleled adhesion and low-temperature printing: The Low carbon plate hot bed platform has unparalleled first-layer adhesion. The substrate is a spring steel plate, which is strongly adsorbed on the printing platform to limit stress deformation. Low-temperature printing, super strong viscosity, avoid head wrapping, energy saving and power saving, no need to worry about printing failure or deformation due to the first layer falling off, greatly improving the printing success rate. Cleaning and use: The low-carbon plate printing hot bed platform is polyurea coated, and attention should be paid to dust prevention during daily use. Before use, wipe off the surface dust with a non-woven cloth, or wipe it clean with alcohol. Using the recommended parameters of [Texture PEI Build Plate], the recommended temperature for filament PLA can be set to 30-50 degrees Celsius, and the recommended temperature for PETG is 50-70 degrees Celsius. If the recommended parameters of the newly launched [Low Temperature Warming Build Plate] are used, the recommended temperature can be appropriately reduced by about 10 degrees Celsius. Adjusting the temperature requires debugging. Perfect compatibility: Low carbon plate build plate is suitable for 3D printers with a platform size of 257x257mm, and is compatible with Bambulabs P1P, P1S, X1C, X1E, A1. There is an identification code on the surface, and the x1 series machines with laser scanning function can recognize the automatic leveling hot bed platform. Operation suggestion: It is recommended that you select the default parameters of [Texture PEI] when printing, then select the corresponding consumables, and then modify the printing temperature.